Gl-5 85W/90 Automotive Gear Oil

• Customization: Available
• Additives: Antioxidants, Anti-Wear Additives, Dispersants, Friction Modifiers, Viscosity Index Improvers
• Application: Cooling, Lubrication, Rust Prevention, Sealing, Shock Absorption
• Model NO.: GL-5/4/3
• Base Oil Type: Full Synthetic / Mineral-Based / Semi-Synthetic
• Type: Gear Oil
• Viscosity Grade: SAE 75W-90 / 80W-90 / 85W-140
• API Level: API Gl-4 / API Gl-5 / API Mt-1
• Subfield: Hypoid Gears / Manual Transmissions / EV Reduction
• Viscosity Index: ≥156 (Fully Synthetic Oil) / ≥105 (Mineral O
• Tilt Point: -54ºC (Fully Synthetic) / -30ºC (Mineral
• Flash Point: 220 ºC or Higher
• Shear Resistance Performance: The Viscosity Decrease Rate of Krl(20h) Is ≤3.5
• Extreme Pressure and Anti-Wear Performan: Pb≥1500n / Zmz≥30n·m
• Applicable Vehicle Types: Heavy-Duty Trucks / Mining Equipment / Agricultura
• Environmental Adaptability: Stable at 120ºC (Middle East)/Cold Start at -
• Additive Technology: Extreme Pressure (Ep) Additives / Arg Power
• Service Support: 8 Languages Technical Datasheet / Free Samples for
• Localization Adaptation: Customized for African Dusty Conditions / Middle E
• Transport Package: Plastic Drums/Iron Drums/Ton Drums
• Specification: 1L Bottle / 20L Pail / 209L Drum
• Trademark: Huafu Hangba
• Origin: Jining, Shandong Province, China
• HS Code: 2710199200
• Production Capacity: 500, 000 Tons/Year
• Package Size: 120.00cm * 120.00cm * 100.00cm
• Package Gross Weight: 800.000kg

Product Description

 

Introduction to Gear Oil for Heavy-duty Vehicles

GL-5 gear oil is a heavy-duty vehicle gear oil formulated by the American Petroleum Institute (API). It belongs to the high-end product in the performance grades of gear oil and is mainly used for gear lubrication under high load, high-speed impact and harsh working conditions. The following is its core information:
I. Performance Characteristics
Excellent extreme pressure and anti-wear performance
Adding high-concentration sulfur and phosphorus extreme pressure additives can form a protective film under high pressure and high temperature conditions, reducing the wear on the gear surface. It is especially suitable for high-load contact components such as hyperbolic gears.
Good antioxidant and thermal stability
Resist the formation of sludge and paint film caused by high-temperature oxidation, extend the oil change cycle, and keep the lubrication system clean.
Anti-corrosion, anti-rust and anti-emulsification properties
Protect gears and metal parts from moisture and acidic substances, suitable for damp or dusty environments.
Appropriate viscosity and viscosity-temperature characteristics
Different viscosity grades (such as SAE 75W-90, 80W-140, etc.) are provided to meet the requirements of low-temperature starting performance and high-temperature lubrication.

 

Introduction to Transmission Oil


Transmission fluid is a specialized lubricating oil used for transmissions (gearboxes), featuring functions such as lubrication, heat dissipation, cleaning, hydraulic transmission, and gear protection. It is classified into manual transmission fluid (MTF), automatic transmission fluid (ATF), dual-clutch transmission fluid (DCTF), and continuously variable transmission fluid (CVTF) based on the type of transmission. The structures and working principles of different types of gearboxes vary greatly, and special oil products need to be matched. Misuse may lead to serious damage.

 

Detailed Photos

 

 

Application scenario

 

 

Heavy-duty industrial gear oil is mainly applied in industrial equipment and machinery that bear high loads and harsh working conditions, including but not limited to the following aspects: 1 In the steel industry, heavy-duty industrial gear oil is often used in the gearboxes of equipment such as rolling mills, continuous casting machines, and hot rolling mills in the steel industry. These devices are subjected to extremely high loads and temperatures during operation, and thus require the use of industrial gear oil that can withstand heavy loads and high temperatures to provide good lubrication and protection. 2. Excavation and mining equipment: Heavy-duty industrial gear oil is often used in the gearboxes of heavy equipment such as excavators, loaders, and mining hoists.

Product Parameters

  Shandong Huafu Petrochemical Co., LTD          

  Oil product inspection report    
 

Name of oil product		GL-5 85W/90 vehicle gear oil					enforce standards			GB 13895-92
Inspection items					Measured standard				Inspection method
Viscosity			40ºC		105				GB/T 265
			50ºC		------
			100ºC		15
The flash point (open) shall not be lower than					224				GB/T 3536
The freezing point (ºC) shall not exceed					-25				GB/T 3535
Viscosity index					149				GB/T 2541
The acid value, mgkoH/g, is not greater than					Report				GB/T 264
Moisture content (mass fraction) % shall not be greater than					Trace				GB/T 260
The water-soluble acid or alkali is no more than					no				GB/T 259
Mechanical impurities					0.02				GB/T 511
Conclusion:                                 Qualified Note: Other requirements are determined by the enterprise.
Laboratory technician	Zhang Bo			Inspector		Wang Chang 'e		Reviewer			Liu Aichuang

Our Advantages

 

Company Profile

 

Shandong Fufu Petrochemical Co., Ltd. is a comprehensive oil company integrating science, industry and trade. The company is a comprehensive petrochemical enterprise integrating product development, production, sales and service. Products cover construction machinery special oil, refrigeration oil, turbine oil, anti-wear hydraulic oil, metal processing oil, turbine oil, compressor oil, gear oil, anti-rust oil, vacuum pump oil, thermal oil, white oil, quenching oil, coal special emulsified oil transformer oil, grease and many other petrochemical fields. The company adheres to the business philosophy of "being a man first, then doing things", the company will cast the brilliance of "Slippery Fu" with distinctive management characteristics, rich cultural working atmosphere, increasingly perfect marketing and sales network and diversified development strategies, and repay the society with efficient and high-quality service.
Global science and technology, serve China! Today, "Lube" lubricants is placed in a new international context, and will provide Chinese consumers with more reasonable lubricants and maintenance services with first-class products and services, and at the same time, work with customers to build a health, safety, environmental protection and sustainable development of the best area. After suffering and precipitation, the company will continue to move forward for the practice of high-end quality and international development goals.
The company's business strategy is: actively expand sales channels, and strive to find partners with pioneering spirit. We provide reasonable prices, excellent quality lubricant products, and provide comprehensive assistance in marketing strategy, personnel training and technical consulting, with a view to long-term cooperation and common development on the basis of mutual benefit.

FAQ

 

Q1: Are you a trading company or a manufacturer?
A: We are a professional lubricant manufacturer with 23 years of industry experience. Our factory is located in Shandong Jining, the hometown of Confucius and Mencius in China.

Q2: When is the delivery time?
A: Delivery time is about 10 days after the down payment. The exact delivery time depends on the product and quantity of the order.

Q3: What are your payment terms?
A: According to our sales policy, we require 30%-40% wire transfer in advance and 60%-70% of the balance before shipping. We can provide a real photo or view of the item before paying the balance
Frequent.

Q4: What are your delivery terms?
A:FOB, CFR, CIF or EXW.

Q5: What's your packing like?
A: Usually, it comes in 200L metal drums, PE bags, cans or drums of different sizes. It depends on your product requirements. We will do our best to meet the requirements of our customers.

Q6: Can I get some samples from you?
A: Of course. We will provide free samples, but you need to pay for shipping.

Q7: Can you provide ODM or OEM?
A: We can. We can cooperate in this way to meet the requirements of the order. If necessary, please provide a sample, which will help us to carry out the test.

Q8: How do you control product quality?
A: The company has independent laboratories and testing equipment, and has established a strict quality control system. From the procurement of raw materials to the delivery of finished products, every stage is strictly inspected and monitored. All products meet or exceed national and industry standards.

Q9: How do you secure our long-term business relationship?
A: We have a professional sales and service team, can provide you with timely and accurate technical support and solutions. Whether you encounter problems in product selection, use process, or need to customize special specifications of lubricant products, we will be happy to serve you.