• Excellent wear resistance: Containing special extreme pressure anti-wear additives, it can form a strong protective film on the gear surface, effectively reduce the tooth surface wear, extend the service life of the gear, and ensure that the equipment can still operate normally under harsh conditions such as high load and high speed.
• Good lubrication performance: with appropriate viscosity and viscosity index, can maintain a stable oil film thickness at different temperatures, achieve good lubrication, reduce friction coefficient, reduce energy loss, improve transmission efficiency.
• Excellent antioxidant stability: During long-term use, it can resist the influence of high temperature, oxygen and other factors, slow down the oxidation rate, reduce the formation of oxidation products such as sludge and paint film, thereby extending the oil change cycle and reducing maintenance costs.
• Excellent anti-emulsification and anti-foam properties: can quickly separate the water mixed in the oil to avoid the decline in lubrication performance caused by emulsification; At the same time, it can effectively inhibit the foam generation, prevent the foam from affecting the lubrication effect and leading to equipment failure.
• Reliable anti-rust and anti-corrosion performance: the addition of anti-rust agents and preservatives can form a protective film on the metal surface to prevent rust and corrosion of gear and bearings and other parts, even in the environment of wet or corrosive media can provide good protection.
| Oil name |
L-CKC220# Medium duty industrial closed gear oil |
enforce standards |
GB 5903-2011 |
| Inspection item |
Inspection standard |
Measured standard |
Inspection method |
| viscosity |
40ºC |
198-242 |
228
|
GB/T 265
|
| 50ºC |
------ |
------ |
| 100ºC |
------ |
------ |
Flash point ºC (open)
Not lower than |
200 |
220 |
GB/T 267 |
Pour point ºC
No higher than |
-8 |
-14 |
GB/T 3535 |
Viscosity index
No less than |
90 |
Not less than 95 |
GB/T 2541 |
Acid value, mgkoH/
Not more than |
Report |
Report |
GB/T 4945 |
| Moisture content (mass fraction) /℅ |
vestige |
vestige |
GB/T 260 |
Water soluble acid or base
Not more than |
no |
no |
GB/T 259 |
| Liquid phase corrosion test (distilled water) |
rustless |
rustless |
GB/T 11143 |
| Copper corrosion test (121ºC,3h) |
1 |
1 |
GB/T 5096 |
| Mechanical impurity |
0.02 |
0.02 |
GB/T 511 |
Conclusion:
Up to standard
Note: Other requirements, according to the enterprise. |
Shandong Fufu Petrochemical Co., Ltd. is a comprehensive oil company integrating science, industry and trade. The company is a comprehensive petrochemical enterprise integrating product development, production, sales and service. Products cover construction machinery special oil, refrigeration oil, turbine oil, anti-wear hydraulic oil, metal processing oil, turbine oil, compressor oil, gear oil, anti-rust oil, vacuum pump oil, thermal oil, white oil, quenching oil, coal special emulsified oil transformer oil, grease and many other petrochemical fields. The company adheres to the business philosophy of "being a man first, then doing things", the company will cast the brilliance of "Slippery Fu" with distinctive management characteristics, rich cultural working atmosphere, increasingly perfect marketing and sales network and diversified development strategies, and repay the society with efficient and high-quality service.
Global science and technology, serve China! Today, "Lube" lubricants is placed in a new international context, and will provide Chinese consumers with more reasonable lubricants and maintenance services with first-class products and services, and at the same time, work with customers to build a health, safety, environmental protection and sustainable development of the best area. After suffering and precipitation, the company will continue to move forward for the practice of high-end quality and international development goals.
The company's business strategy is: actively expand sales channels, and strive to find partners with pioneering spirit. We provide reasonable prices, excellent quality lubricant products, and provide comprehensive assistance in marketing strategy, personnel training and technical consulting, with a view to long-term cooperation and common development on the basis of mutual benefit.
Service and support
Shandong Fufu Petrochemical Co., LTD. Service concept: your satisfaction, my pursuit.
Because of professional, so excellent, leading the advanced technology of lubricating oil.
Shandong Lifu Petrochemical Co., Ltd. detailed service will bring you unlimited care
First, large-scale production and cost advantages
1. Capacity and equipment advantages: 30,000 square meters of production base, annual capacity of 500,000 tons; The annual production capacity of Warbrand technology covers 200,000 tons of base oil and 150,000 tons of canning line, and adopts a fully intelligent DCS control system to improve efficiency. Diluted unit costs in mass production while gaining price advantage through centralized procurement of base oils and additives.
2. Flexible production mode: Support small batch customization (minimum order of 50 boxes) and fast delivery (fastest delivery in 3 days) to meet the diversified needs of brands.
Second, technology research and development and quality assurance
1. Independent research and development ability:
• With a full range of lubrication technology, covering aerospace, high-speed rail and other high-end fields, grease, synthetic oil and other technologies to achieve the international "leader".
• Huge laboratory investment (R&D center investment of more than 10 million, equipped with more than 70 precision instruments), can complete 77 performance tests to ensure product stability.
2. Certification and standard development: Through API, DIN, ISO and other international certifications, and lead the development of national standards (such as GB 11118.1-2011) and industry standards, improve the technical voice.
Third, the whole chain service ability
1. One-stop foundry service:
• ODM/OEM support: From formula development, packaging design to channel planning, enabling brands to quickly enter the market.
• After-sales support: Provide lubrication management solutions and technical training to reduce customer operational risks.
2. Supply chain integration: Establish stable cooperation with global raw material suppliers to ensure supply stability and logistics efficiency.
Fourth, market response and brand competitiveness
1. Quickly adapt to demand: Develop special products (such as hydrogen energy equipment lubricating oil) for emerging fields such as new energy and intelligent manufacturing to seize market opportunities.
2. Brand endorsement effect: Through cooperation with international giants and accumulation of aerospace lubrication technology, Glifu Lubricants has formed trust in the high-end market, occupying 65% of the loaded vehicle oil of Chinese automobile enterprises.
V. Green and sustainable development
1. Application of environmental protection technology: low zinc formula reduces pollution and extends oil change cycle.
2. Energy saving and emission reduction: high clean lubricating oil reduces energy consumption of equipment
Q1. Are you a manufacturer?
Yes, Shandong Huafu Petrochemical is a high-tech comprehensive manufacturer integrated with R&D, production and sales. It is one of the largest and most powerful producers in Shandong, China
Q2: How do you control your product quality?
First, we are picking and testing samples from every step through the whole production lines, and there are several different inspectors to test the samples to guarantee the correct data.
Second, we have our own Q&C center to pick up and keep the samples from every batch in order to trace the quality when our clients have questions.
Third, the third part can be also acceptable for choosing.
Q3. What is your MOQ?
Our MOQ is 4 drums loaded on one pallet.
Q4. What is your term of packing?
Our packing is usually 200L metal drum or 18L bottle, other packings such IBC tank can be also provided according to clients' needs.
Q5. What is your payment term?
T/T in advance, L/C is acceptable.
And our regular payment term is that T/T 30% as the deposit, and 70% against the photos for the accomplishment of the productions and packages before the delivery.
Q6. What are your delivery methods?
EXW, FOB, CFR, CIF, CIP
Q7. How about your delivery time?
Within 10 days after PO and receipt of your payment.
The specific delivery time will depend on the items and quantity of your order.
Q8. Can you produce according to the samples?
Yes, we can produce the suitable ones according to TDS or test data of your samples.
Q9. What is your sample policy?
We can supply the free samples with the freight cost paid by the buyers.
Q10: How do you ensure our long-term business relationship?
We are sincerely hoping to establish the good long-term business relationship with our esteemed clients, so we will do our best to guarantee our customers' benefit, stable quality and competitive prices are essential, and we are also provide our increasingly advanced technology for our clients' to meet the increasing needs in the current markets.
){kind=link}